In Ukraine, we have a very "fresh" mulcher BEDNAR MULCHER MZ 4500 Bednar Mulcher 4500 with a small operating time. The working width is 4.5 meters, for a tractor of 120 hp.

TECHNICAL DATA
of the Bednar MULCHER MZ 4500 mulcher

Working width, m - 4.5
Transport width, m - 2.3
Transport length, m - 5.6
Transport height, m - 2.2
PTO speed, rpm - 540/1,000
Transmission - vertical
Number of rotors, pcs - 3
Number of rotor knives, pcs - 4
Peripheral speed of knives, m/s - 36
Maximum diameter of mulched material, cm - 5
Frame type folding folding folding
Maximum axle load, kg - 2 150
Maximum load on the hitch, kg - 1 010
Working angle of wings/sections from -15° to +45°
Recommended tractor power, hp - 120 - 140
Hitch type - eye 40, 50 / K80
Total weight, kg - 3 160

UNITS FOR HEAVY WORK
The three-rotor models of the BEDNAR MULCHER MZ 4500 are crop residue mulchers that are among the most popular machines of their type not only in Europe. The working width of 4.5 m guarantees high productivity while reducing operating costs. The robust design of the units with a hot-dip galvanized surface allows you to use the unit to the maximum even in the most difficult farming conditions.
HIGH STABILITY AND SAFETY
The main advantage of BEDNAR mulchers is the hot-dip galvanizing of the entire body of the unit, which will extend the service life many times over. The body of the unit is galvanized in zinc baths, which allows you to fully protect and strengthen the surface and interior of the mulcher. The unit is protected from aggressive plant sap, climatic effects, and stone damage, which causes faster damage and instant corrosion in painted parts. Such phenomena are minimized on surfaces that have been hot-dip galvanized.
FRONT CONTROL
To increase the shredding efficiency, counter blades are installed in the front of the unit to help cut the material, which improves the quality of mulch shredding.
COUNTER-ROW SHUTTERS
The ideal operation of the unit is ensured by the use of slides that evenly distribute the crushed material over the surface, without the formation of rows, etc.
REINFORCEMENT
The mulchers are equipped with reinforced replacement plates to reinforce the frame sections above the cutting mechanism, which often prevent damage to the machine. Each rotor is additionally protected by a rotor cover, which allows for minimum height operation.
CROSSWALK AXLE
The central walking axle helps to overcome uneven ground
with minimal deviation from the desired cutting height. This ensures a smooth ride even on very uneven ground.
WORKING EVEN
IN THE UPRIGHT POSITION
The wings of the MZ and MM mulchers operate on an oscillating arm
and perfectly follow the terrain from -15° to +45°. With the side wing at +45°, the machine can be used for cultivating bushes and grass at the edges of roads and fields.
EASY ADJUSTMENT OF THE MULCHING HEIGHT
On the MZ and MM, the mulching height can be adjusted via hydraulic clips
on the hydraulic cylinder of the machine's center axle. Simple, fast and comfortable adjustment.
MULCHER MZ
MAIN ADVANTAGES OF THE MACHINE
- High work productivity.
- High strength of the machine and safe operation.
- 2 types of knives for universal use.
- Excellent terrain tracking.
- Wide range of additional options.
- Easy maintenance.